Free · no sign-up · calculated in your browser
Pixel to Print Size Calculator
Type a pixel width and height—or drop a photo to fill them in—to see its print size in inches and centimeters, or enter a print size in inches to calculate the pixels required.
How do I calculate the print size of an image from its pixels?
Enter the image's width and height in pixels (or drop the photo into the box above to fill them in automatically) and pick a DPI from the menu (72, 96, 150, 300, 600 DPI). The calculator divides pixels by DPI to show the exact print dimensions in inches and centimeters, along with how well the photo fits 4×6 in, 5×7 in, 8×10 in, 11×14 in, A4, A3.
How it works
01
Enter pixels or drop a photo
Type the Width (px) and Height (px), or drop an image file into the box at the top to read its pixel dimensions automatically.
02
Choose the target DPI
Select 72, 96, 150, 300, 600 DPI from the menu. It starts at 300 DPI, the standard for sharp photo and book printing.
03
Check print sizes or reverse the math
Read the print size in inches and centimeters plus the quality table for 4×6 in, 5×7 in, 8×10 in, 11×14 in, A4, A3, or type a Print width (in) and Print height (in) to see the pixels needed.
How pixels, DPI and physical print size connect
Digital images only have a pixel width and height. To turn pixels into inches or centimeters on paper, a printer needs a density setting in DPI (dots per inch, or PPI for pixels per inch). The formula is simple: inches equal pixels divided by DPI, and centimeters equal inches multiplied by 2.54. In reverse, required pixels equal inches multiplied by DPI.
At 300 DPI, a 3000 by 2400 px photo prints at 10 by 8 inches (25.4 by 20.32 cm). Drop the density to 150 DPI—often used for large wall posters viewed from a few feet away—and those same pixels cover 20 by 16 inches (50.8 by 40.64 cm).
Reading the standard paper size table
Whenever pixel dimensions are filled in, the calculator checks how your image fits 6 standard print sizes: 4×6 in, 5×7 in, 8×10 in, 11×14 in, A4, A3. Because paper sizes are listed portrait while photos can be portrait or landscape, the tool checks both orientations and marks sideways when turning the photo 90 degrees reaches a higher DPI.
Each row shows the pixels needed to hit your chosen DPI on that sheet, the DPI your pixels reach when the photo is fitted to that sheet, and a quality rating: great at 300 DPI or higher, good from 200 to 299 DPI, and low below 200 DPI.
What this tool does not do
It does not resize the image file, rewrite the file's DPI header (use DPI Converter for that), or crop a photo to match a paper frame's aspect ratio.
Keep exploring
Related free tools
Questions
Print Size Calculator: FAQ
If I drop a photo here, is it uploaded?
No. Dropping a file only decodes its width and height inside your browser tab to fill in the Width (px) and Height (px) boxes. Your image stays on your device, while the page sends usage events to Google Analytics.
What DPI should I choose for printing?
Use 300 DPI for photo prints, books, flyers and anything held in the hand. Use 150 DPI for large posters or canvas wraps viewed from across a room, and 72 or 96 DPI when comparing screen-scale layouts.
What do the great, good and low ratings mean?
For each standard paper size, the tool calculates the effective DPI your pixels achieve on that sheet: 300 DPI and above is marked great, 200 to 299 DPI is marked good, and under 200 DPI is marked low.
Why does a paper size row say sideways?
Standard paper sizes are listed portrait (for example, 4×6 in). If your photo is wider than it is tall (landscape), turning it sideways fits the paper much better, so the calculator rotates it automatically and labels the row sideways.
How do I embed the new DPI value into my image file?
Open the DPI Converter or 300 DPI Converter linked below to write the DPI number into the header of a JPG or PNG file without changing its pixels.